Combi 7100 Series Bedienungsanleitung PDF herunterladen (Seite 7)

Waveform Monitors • www.tektronix.com/video

Digital and Composite Waveform Rasterizers

WVR7000 Series • WVR7100

Analog Composite Waveform

Vertical Characteristics

(Option CPS)

Vertical Measurement Accuracy –

±1% all gain settings.

Gain –

1X, 5X, variable range 0.25X to >7.5X.

Frequency Response –

Flat to 5.75 MHz, ±1%.

Waveform Horizontal

Deflection

Sweep Timing Accuracy –

±0.1%.

Sweep Linearity –

±0.1%.

Audio Characteristics

(Optional Capability)

Level Meter Resolution –

0.056 dB steps at 30 dB scale from full scale to

–20 dBFS; 0.20 dB steps at 70 dB scale for signals

above –20 dBFS.

Meter Ballistics –

True peak, PPM type 1, PPM type 2, extended VU.

Defined/Programmable Level Detection –

Mute, clip, user programmable silence, over.

Level Meter Accuracy Over Frequency –

–0.5 dB (for analog), –0.2 dB (for digital) from 20 Hz

to 20 kHz, 0 to –40 dBFS sine wave, Peak Ballistic

mode except for some submultiples of the 48 kHz

sampling frequency.

Digital Audio (Options DG

and DA)

AES Inputs –

2 sets of 8 channels each, 32 kHz, 44.1 kHz,

48 kHz, 96 kHz, 24-Bit.

AES Input Characteristics –

BNC, 75 Ω terminated, unbalanced, 0.2 V to 2 V

p-p

AES Input Return Loss –

>30 dB relative to 75 Ω from 0.1 to 6 MHz.

AES Outputs (from embedded sources) –

Up to 8 channels, 48 kHz, 20-Bit for SD and 24-bit

for HD.

AES Output Characteristics –

BNC, 75 Ω terminated, unbalanced, 0.9 V to 1.1 V

p-p

into 75 Ω.

AES Output Return Loss –

>25 dB relative to 75 Ω from 0.1 to 6 MHz.

AES Output Jitter –

3.5 nsec, peak, typical, with 700 Hz high-pass filter

per AES specification.

Analog Audio (Option DA)

Analog Inputs –

2 sets of 6 channels each.

Analog Input Characteristics –

Balanced, unterminated via 37-Pin D-sub connector.

Cross Talk –

<88 dB.

Input Impedance –

35 kΩ, typical.

Analog Outputs –

6 channels.

Analog Output Characteristics Balanced or

Unbalanced –

Unterminated via 37-Pin D-sub connector.

Maximum Output Level –

Balanced: +24 dBu ±0.5 dB.

Unbalanced: +10 dBv ±0.5 dB.

Maximum Average Power: 25 mW per pair.

Recommended Load: 600 Ω or higher.

Digital Input to Analog Output Gain Accuracy

Over Frequency –

±0.5 dB, 20 Hz to 20 kHz, 0 to –40 dBFS, 20- or

24-bit inputs.

Analog Input to Analog Output Gain Accuracy

Over Frequency –

±1 dB, 20 Hz to 20 kHz, 24 dBu to –16 dBu.

Output Impedance –

50 Ω, nominal.

Power

100 to 240 VAC –10%.

75 W.

Physical Characteristics

Dimensions mm in.

Height 44.45 1.75

Width 482.6 19

Depth (front to back including handles and BNCs)

514.35 20.25

Weight kg lbs.

Net 3.97 8.75

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Combi 7100 Series Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kinderwagen Combi 7100 Series