Combi CATALYST Bedienungsanleitung PDF herunterladen (Seite 5)

Catalyst Instruction Manual 5

ATTACH/REMOVE SEAT

STROLLER ASSEMBLY

STEP 1: Insert the posts on the sides of the seat into

the slots of the frame. Push until you hear it “click” on

both sides.

STEP 2: Gently pull up on seat to be sure it is properly

attached to the frame.

STEP 1: Insert metal post into bumper bar

attachment slots found on both sides of seat.

NOTE: The metal post can only be installed one way. Match oval

guides beside the metal post to the oval guides on seat adapter.

STEP 1: Snap each side of canopy attachment to

seat frame, just above bumper bar.

STEP 2: To remove, locate release lever on the inside

of bumper bar latch. Use one nger to release button,

and the other hand to release locking mechanism.

Repeat on the other side.

STEP 2: Pull canopy fabric over seat back. Attach

snaps at the rear of the seat (x2).

STEP 3: To remove, push both release buttons (gray)

and lift seat from the frame.

ATTACH/REMOVE THE BUMPER BAR CANOPY INSTALLATION

NOTE: Seat can attach in either forward or rear-facing direction.

NOTE: White dot indicates location of release lever

NOTE: Canopy coverage is adjustable.

CombiUSA.com

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Combi CATALYST Bedienungsanleitung Seite 5