Combi 7100 Series Spezifikationen PDF herunterladen (Seite 51)

EXTERNAL MUSIC INTERFACES

The OfficeServ 7100 MP10a provides one input for connecting to customer provided external music sources.

This source can be used to provide background music, or any of the varied Music On Hold (MOH) uses.

EXTERNAL PAGE INTERFACES

The OfficeServ 7100 MP10a provides one external page output and two zone control relays. Common relays

are shared between external page zones and common bell feature.

FLASH KEY OPERATION

While a user is on an outside line, pressing the FLASH key will send a timed disconnect signal to the central

office or PBX. This is used for custom calling features on C.O. lines or in conjunction with CENTREX/PBX oper-

ation. System programming allows individual flash times for C.O. and PBX lines. When C.O. or PBX flash is not

required, setting the timers for two seconds releases the existing call and returns dial tone to make a new call.

FLEXIBLE NUMBERING

System programming allows stations to have three or four digit extension numbers beginning with the digit

2 or 3. Three digit default extension numbers begin with 201 and four digit defaults begin with 2001. Station

group numbers can be three or four digits beginning with the digit 5.

Using digits other than 2, 3 or 5 will require the technician to change other default feature access codes in

the system default numbering plan. User guides may need to be modified as these are all written using the

OfficeServ 7100 default numbering plan.

GROUP BUSY SETTING

This feature provides a busy signal to intercom callers that ring to a station group when all logged-in stations

are busy. The feature is activated in MMC 601 and when set to ON setting, allows an intercom caller to hear a

busy signal when calling a station group. Upon hearing a busy the intercom caller will know that all stations

are busy and can call back. When this option is set to OFF position the intercom caller will hear ring-back tone

when all stations are busy and the call will queue for the next available station. Turning this option ON will

override the Overflow setting when the group is busy. The default setting is OFF.

HOT DESKING (IP KEYSETS)

Hot desking is an industry term that describes stations where multiple people have one or more work areas

or share a common work are. Samsung IP keysets allow users to log in and out from any keyset of the same

model in the system. This allows a user to work from any available desk and retain their phone number, speed

dials, voicemail, and programmed buttons.

HOT LINE

Stations can be programmed to call a pre-defined station or station group whenever that station goes off-

hook. A hot line delay timer of 0–250 seconds can be programmed to allow sufficient time to make a differ-

ent call. This timer is programmable on a per station basis.

IN GROUP/OUT OF GROUP

Individuals assigned to a station hunt group may temporarily remove their telephones from the group by

pressing the In/Out of Group button (IG) providing that there is someone still in the group. There is a system

wide option to allow all members to log out of a station group. Stations out of a group will not receive calls

to that group but will continue to receive calls to their individual extension numbers. When desired, the user

may put him/herself back into the group by pressing the button again. Users who do not have this button

4.18

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 103 104

Keine Kommentare

Combi 7100 Series Spezifikationen Seite 51