Combi Flash 7650 Series Bedienungsanleitung PDF herunterladen (Seite 24)

CombiFlash Torrent® User Manual

2-4

2.4.4 Cabling: Network Connection

The Torrent can be added to a network or directly connected to

a computer for remote control.

To add the Torrent to a network, connect a standard

straight-through network cable between the Torrent’s

Ethernet port and your network. If purchased from Teledyne

Isco, straight-through cables are tan in color.

To connect the Torrent directly to a computer, connect a

“crossover” cable between the Ethernet ports on the Torrent

and a stand-alone computer. If purchased from Teledyne Isco,

crossover cables are blue in color.

Refer to Section 5 of this guide for complete network

instructions.

Note

When using the Foxy R2 High Flow fraction collector, the Torrent’s

rear panel Ethernet connector will be in use. Instead, connect the

cable to the available Ethernet port on the last Foxy in the chain.

Note

The Foxy R2 fraction collector does not support DHCP. If you are

adding the Torrent with Foxy R2 fraction collectors to your

organization’s network, a static IP address must be assigned to

each unit. Contact your IT department for assistance.

Detailed information about networking the Torrent with one

or more Foxys is provided in Section 2.10.2 O

PTIONAL FOXY R2

IGH FLOW FRACTION COLLECTOR.

2.5 Position the Torrent

After completing the various back panel connections, the

Torrent can be moved to its operating position. Turn the

Torrent so that the operator can access all of the front view

features and controls (Figure 1-1). Use care not to damage the

connections, cables, and equipment while moving the Torrent.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 158 159

Keine Kommentare

Combi Flash 7650 Series Bedienungsanleitung Seite 24